Posts Tagged ‘ Linksys ’

Setting up BLF functions on a Linksys SPA-942

Oct 27th, 2008 | By admin | Category: Featured Articles, Misc

With the lastest firmware (v6.1.3), the Linksys SPA-942 can now suppoprt BLF on Asterisk systems. Implementing it is actually quite simple as we will see in this article. If you aren’t familair with BLF, this is called Busy Lamp Field and is used to show the status of another extension and to act as a [...]



Linksys SPA-942 IP Phone Review

Mar 13th, 2008 | By admin | Category: Product Reviews

Linksys is certainly paving the way with their VoIP products lately and we certainly were impressed with the SPA-941 phone although it was a bit lacking in a few features that we considered to be key items. The new SPA-942 is now readily available and addresses several of these key features. Let’s look under the [...]



Guide to the SPA-3102

Mar 30th, 2007 | By admin | Category: Product Reviews

The Linksys SPA-3102 is a cool little device that can convert your analog phone line into a SIP trunk into your trixbox or Asterisk PBX PBX system. The problem is most people have a ton of problems getting them to work properly.
While there are a ton of settings, there are really only about 7 [...]



Linksys Wireless-G Phone Bridge

Apr 25th, 2006 | By admin | Category: Product Reviews

Linksys is undoubtably skyrocketing to the top of the VoIP product hill and products like the WBP54G are proof that Linksys is listening to their clients and coming out with products that people want. The WBP54G Wireless bridge allows placement of an IP phone in locations where pulling CAT5 cable isn’t feasible. As long as [...]